UD68 Guide
Getting Started: 1.0
What's Included: 1.1
- UD68 DDU
- 4mm Carbon Fiber Mounting Plate
- All Bolts necessary for mounting
- USB-C Cable
Requirements: 1.2
- This device can be configured from the Simcore Control Center application available here: Simcore Control Center
- This device can draw a large amount of power and a powered usb hub may be required if issues are encountered
- To make use of the RGB LED's and screen the simhub software is required. it can be found here: simhubdash.com
Compatibility: 1.3
The Simcore UD68 is supported natively by SimHub.
for a full list of supported games, see the SimHub website.
Software Setup: 2.0
To test and configure the device you may need to download the SimCore Control Center application from the
link here
The application is available in either a standalone format or as an installer depending on which you
prefer. There is no difference in functionality between the two.
Troubleshooting: 3.0
- Before trying any troubleshooting steps you should first make sure your firmware is up to date and that you are running the correct version.
- To check for any hardware LED issues run the LED test in the SimCore Control Center app. If any LED's are not working correctly please contact support.
- If you think there may be either a firmware or software issue please send a bug report using this link so we can fix the issue as soon as possible.